Development,validation and application of a UHPLC–MS/MS method for quantification of the adiponectin-derived active peptide ADP355 in rat plasma

A UHPLC–MS/MS method for the quantification of ADP355, an adiponectin-derived active peptide, was developed and validated. The extraction method employed simple protein precipitation using methanol and chromatographic separation was achieved on anAccucore™ RP-MS C₁₈ column (100 × 2.1 mm, 2.6 μm, 80 Å), using 0.1% formic acid in both water and acetonitrile with gradient elution at the flow rate of 400 μl/min within 4.0 min. Detections were performed under positive ion mode with multiple reaction monitoring ion transitions m/z 1109.2 → 309.8 and 871.4 → 310.1 for ADP355 and Jt003 respectively at unit resolution. The linearity range of the calibration curve was 2–1,000 ng/ml with a lower limit detection of 0.5 ng/ml. The selectivity, linearity, precision, accuracy, recovery, matrix effect and stability were validated, and all items met the requirement of US Food and Drug Administration guidance. This method was successfully applied to an intravenous pharmacokinetic study of ADP355 in rats and the in-vitro stability in rat serum, plasma and whole blood was also assessed.     

基于改进克隆选择算法的统一混沌系统同步控制与参数辨识

提出一种改进的克隆选择算法用于解决混沌系统的参数辨识问题.该算法利用抗体的高频变异和受体编辑两种机制有效平衡算法的全局探索与局部开发，并引入向精英抗体学习策略进一步提高算法的收敛质量.对10个优化问题的实验表明：所提出算法在求解精度、收敛速度以及稳定性方面具有更好的性能.以参数未知统一混沌系统的同步控制为研究对象，合理设计同步控制器，并对同步系统的稳定性进行理论分析.通过对同步比例因子的设置，实现统一混沌系统的完全同步、反同步、投影同步等多种同步方式.仿真实验结果表明该方法能够实现对未知系统参数的精确辨识以及驱动-响应系统的有效同步控制，验证了所提方法的可行性与有效性.     

Nd∶YVO4/Nd∶GdVO4双波长激光器的功率均衡实验研究

实验研究了Nd∶YVO4/Nd∶GdVO4双波长激光器在不同抽运功率条件下,通过调节热沉温度达到功率均衡时的输出特性.实验结果表明:对于Nd∶YVO4/Nd∶GdVO4双波长激光器,当提高抽运功率,需要重新降低热沉温度达到功率均衡输出,降温幅度与抽运功率增加之比为11.23℃/W.与此同时,随着抽运功率和热沉温度的变化,双波长激光器的中心波长会出现小幅度的漂移,左峰波长随抽运功率增加的蓝移速率为0.056 nm/W,右峰波长随抽运功率增加的蓝移速率为0.054 nm/W.实验还发现功率均衡条件下激光器的输出总功率随抽运功率的增加而增加,拟合斜效率为8.7%,当抽运功率为5.58 W时,输出最大总功率达到115.7 mW.     

基于非共轴阵列照明的小型化眼底相机光学系统设计

建立了非共轴阵列照明下的眼底成像数学模型,采用照明光路与成像光路独立设计方法,提出了一种微小型眼底相机光学系统,以避免传统眼底相机中人眼角膜与网膜物镜反射杂光对视网膜图像的干扰.设计了6阵列环形光源照明光路系统,长度仅17.9 mm,实现眼底视网膜有效照明线视场不小于12 mm;成像光路系统采用二次成像设计,光学调制传递函数优于0.2@91 lp/mm,畸变小于5%,长度仅为75 mm.仿真与设计结果表明,该眼底相机光学系统有效抑制了光路中的杂散光,有利于获得高对比度视网膜图像.研究结果可为高像质、小型化以及低杂光眼底相机发展提供设计参考.